A Boxed Herb Garden

Pine Box

A friend of ours who loves to cook has a kitchen with lots of counter space, but no easy access to the outdoors. When I saw this unfinished box in our local craft store, I had the perfect gift idea.

Stain Better

I started with staining the raised portions using Minwax® Water Based Wood Stain in “Green Tea.” Once it dried, I sealed and protected the wood using Minwax® Polycrylic™ Protective Finish.

4. Hardware

And to give it some special character, I then added some inexpensive hardware on the corners.

Jars

Next, I put some decorative rocks in the bottom of some Mason jars, then planted herbs in each one, as well as a few flowers.

Hero

When it was all done, we had a decorative box filled with herbs and flowers to give to our friend for her kitchen.

Be sure to check out Minwax’s new “Made With Love. Finished With Minwax.” campaign currently going on. The theme is ‘Find. Finish. Love.,’ celebrating the thrill of finding real wood pieces – sometimes in the least expected places – and the joy of making them into something we love.

Until next time,

Thanks for stopping by!

Bruce

Modern Succulent Centerpiece Planter with City Farmhouse

By: Guest Blogger

Guest Blogger Jen of City Farmhouse is back with a simple yet elegant DIY project to bring the beauty of nature into your home. Follow along as she walks us through the steps for creating this Modern Succulent Centerpiece Planter.

Hi, there friends! Over the last few years, I have become super fond of succulents, who hasn’t right?! I love the look, colors, sizes, shapes and the fact that they are low maintenance is a bonus for me. Plus you can find them just about anywhere lately, even the grocery store! I thought it would be fun to create an all season, modern succulent centerpiece planter for my kitchen table. I have teamed up with Minwax® for this project and to give my piece a rustic finish.

In planning this piece I knew I didn’t want the soil near the wood and that I wanted a modern vibe so I decided to use plastic planters I found at Target and set them inside the top. I actually created this piece based on the dimensions of these planters, so if you find other planters to use for this project, just alter your measurements accordingly. The great part about this is that I can also pop them in and out easily if I wanted to change the plants.

Modern-Succulent-Planter-677x1024

WHAT YOU WILL NEED:

  • poplar craft board – Four 3ft lengths & One 2ft length (I bought mine at Lowe’s)
  • wood glue
  • finishing nails
  • clamps
  • jig saw or 4″ drill bit adapter
  • sand paper
  • 5 plastic pots from Target that are about 4″ x 4″
  • 5 succulents
  • potting soil
  • pebbles

DIY-Planter-683x1024

HOW THIS WAS MADE:

Cut your pieces from the above diagramMark off 5-4.25″ circles in the top length and cut them out using a jigsaw or 4″ drill bit adapterSand the openings to make them smooth.Take your bottom & 2 sides and glue & nail them, using clamps to hold in place.Once dry take your top with your circle cut outs and do the same, glue & nail.Then do the same for your ends, these will adhere to the outside of the box.After the piece is dry and secure, sand the edges smooth.Now it’s time to stain, I used Minwax® Gel Stain in “Aged Oak.” Be sure to have gloves on and use a cotton cloth to apply. The gel stain was SO easy!!!Next, I sealed it with Minwax® Paste Finishing Wax to give it a protective finish while maintaining a natural look.This Gel Stain is the best!!! It dries fast and no mess!!!

IMG_3065-683x1024

The finishing paste gives the same look on the wood but adds an extra layer of protection.

IMG_3084-682x1024

IMG_3086-675x1024

It’s time to add the planters! I selected 5 different succulents that I found at Lowe’s, all with varying hues, shapes and sizes.

IMG_3101-675x1024

Ta-da! Honestly, I wanted a no-fuss centerpiece that could stay through the seasons. I hit the nail on the head with this one, I absolutely love it!

IMG_3165-677x1024

The stain is just the right shade to balance all the wood tones and brown hues.

IMG_3172-1024x683

A little peek into my new den, aka old dining room.

IMG_3183-668x1024

My favorite part is the circle cut outs, it’s something different. I added pebbles to the planters to give it a finished look.

IMG_3142-678x1024

Modern DIY Succulent PlanterIMG_3187-681x1024

And more succulents in the open shelving:).

IMG_3204-681x1024

Be sure to check out Minwax’s new “Made With Love. Finished With Minwax.” campaign currently going on. The theme is ‘Find. Finish. Love.,’ celebrating the thrill of finding real wood pieces – sometimes in the least expected places – and the joy of making them into something we love.

Jen shares DIY projects and thrifty decorating solutions. Her design philosophy is that bringing style to your home doesn’t have to break the bank. Learn more about Jen and visit City Farmhouse. You Can also follow her on FacebookTwitterInstagram, and Pinterest.

 

A Mountain Wall Shelf

1. Boards

Living within sight of the Blue Ridge Mountains, I was inspired to turn these two 1″ x 4″ oak boards into a wall shelf with a mountain theme. What I liked about this project is that you can make your shelf and your mountain design whatever size you want.

2. first mt

I cut my bottom board 22 inches long, then cut some shorter boards to create my first mountain. As I mentioned, this is your chance to be creative, experimenting with different sizes and shapes.

3. second mt.

I then created my second mountain peak at the opposite end.

4. last mt

Two more boards, and my three peaks were complete. I used both wood glue, and short nails, to hold them together.

5. stain

For this project I selected Minwax® Gel Stain in “Coffee,” applied it with a brush, then wiped off any stain the wood did not absorb. Once it dried, I protected the wood with two coats of Minwax® Fast-Drying Polyurethane in an aerosol can.

Hero

Once the last coat had dried, I hung my shelf on a wall and used it to display some of Leigh Ann’s antique bottles.

Be sure to check out Minwax’s new “Made With Love. Finished With Minwax.” campaign currently going on. The theme is ‘Find. Finish. Love.,’ celebrating the thrill of finding real wood pieces – sometimes in the least expected places – and the joy of making them into something we love.

Until next time,

Thanks for stopping by!

Bruce

 

 

 

An Easy Indoor Herb Garden

Polyshades

If you like to cook using fresh herbs, but don’t have a garden space, take a look at this project. You can make it with just a single board or two, ranging from a rustic barn board to a new piece of oak, which I am using. Since our kitchen trim is dark, I started by staining and finishing my boards in one step using Minwax® Polyshades® in “Mission Oak.”

3. Bracket

After my last coat dried, I attached three inexpensive hose clamps to the board with one small screw each.

Jar

I then placed some drainage stones in the bottom of three mason jars, and planted three popular herbs in them.

Tighten2

With a few turns of my screwdriver, each jar was secured to the board.

V ertical

The only thing left to do was to decide whether to hang our indoor herb garden on the wall vertically….

Horizon tal

Or horizontally. My solution: let Leigh Ann decide.

Be sure to check out Minwax’s new “Made With Love. Finished With Minwax.” campaign currently going on. The theme is ‘Find. Finish. Love.,’ celebrating the thrill of finding real wood pieces – sometimes in the least expected places – and the joy of making them into something we love.

Until next time,

Thanks for stopping by!

Bruce